Just realized that NAND has some bad blocks . Just read it now but compared it to the one that the guy gave me who jtag it first they match do I need to remap first?
JTAG xenon jtag
- Thread starter jpoy808
- Start date
Depends where the bad block is? have you got a copy of the jtag image
Put the nand in 360 flash tool and take a screenshot
Put the nand in 360 flash tool and take a screenshot
Still same results compared nand from the seller and to my dump all match they both have bad blocks though .
Martin C
VIP Member
Re: Jtag xenon rrod after writing xell
Made feeboot img wrote to console unplug power n av n nand x wait 30 secs plug power and av n press eject green light for about 30 sec then rrod
Made feeboot img wrote to console unplug power n av n nand x wait 30 secs plug power and av n press eject green light for about 30 sec then rrod
Martin C
VIP Member
Martin C
VIP Member
Tested my nand connection with multimeter all good so I tried erasing nand with jtag tool then console would not power on so flashed back to img made with multibuild then boots up then rrod after 30 sec. Also do the dvd drive need to be plugged in ?
Martin C
VIP Member
BL4K3Y
VIP Member
Download the correct XeLL image for Xenon motherboards, you can get it from XBins (I think XeLL images are in the free60 folder).
It has to be worth a shot seeing as though other XeLL images don't seem to be working out for you.
Also, images of your JTAG wiring and soldering would be good
.
It has to be worth a shot seeing as though other XeLL images don't seem to be working out for you.
Also, images of your JTAG wiring and soldering would be good
.
Martin C
VIP Member
So I replace the xell.bin in jtag tools from the one from xbins do I need to replace the one in xellous folder also
BL4K3Y
VIP Member
Put it in the XeLL folder and try it but I suspect RROD as Martin has already said (Xenons are well known for it).