xenon rgh - successful

XDK

VIP Member
TX Coolrunner Rev A
68nf cap pll bypass
52cm cpu rst line spliced together
rest of the wires were unchanged and left full length

first successful boot was 1min flat

few attempts were made before this using varying configuration of cpu rst line and routing. will attempt a few more boots and manage to take some pictures if nessecary.. I'll update this further shortly
 

mrdrifta

VIP Member
Jan 31, 2011
325
0
New Zealand
Congratulations, what about consequtive boots? any consistency in boot times?
Also, xecuter was interested in the ecc of another member's xenon that was glitched in about 3 minutes. Maybe he would be interested in yours too.
 

DreamZ

VIP Member
Dec 8, 2009
1,240
0
Essex UK
www.ixtreme.talktalk.net
i tried this earlier on an xenon i had lying around and it took 24 mins to boot lol. second time i tried it didnt boot i left it for half hour, im using just normal old wire bits from other coolrunner installs. but it works as works well. Good job!
 

XDK

VIP Member
Pictures will be great as the community can learn from wiring patterns and success, good to hear :)

damn i just put it back as retail after getting dvdkey didnt snap any pictures at all.



consistency ? lol no not at all

2 outta 5 boots booted

1st boot : 1min
2nd boot: 20mins

i followed standard coolrunner wiring install as for any phat ran cpurst out near edge of mobo right on edge avoiding coils ect.

no problem on sharing the ecc just tell me where to point it..
 

canyou

Senior Member
Dec 2, 2011
109
18
I really thank Tx for great Job

I tried to RGh my Xenon ,I got CPU and DVD key but could not Boot to Final step.Still working to solve it
 

Mister_X

VIP Member
Apr 13, 2011
189
0
Canada
thanks for the post, i cant get mine to boot xell, been sitting for an hour now, green light blinking ever 5 sec. i'm going to try your setup.

I can tell its resetting because the wattage draw on my ups dorps every 5 seconds as well.
 
Last edited:

Mister_X

VIP Member
Apr 13, 2011
189
0
Canada
@OP

I'm still having ah ell of a time just to get this to glitch once so i can get the keys.

Are you using a cap on cpu_rst as well, i know you didn't mention one but i thought id ask. I'm using a 270nf on cpu_rst.

Any one know if i would have better luck going to a 220nf or removing it entirely?
 

XDK

VIP Member
@OP

I'm still having ah ell of a time just to get this to glitch once so i can get the keys.

Are you using a cap on cpu_rst as well, i know you didn't mention one but i thought id ask. I'm using a 270nf on cpu_rst.

Any one know if i would have better luck going to a 220nf or removing it entirely?

no cap on cpu rst line.. just a 68nf cap on pll bypass.
 
  • Like
Reactions: Mister_X

Mister_X

VIP Member
Apr 13, 2011
189
0
Canada
no cap on cpu rst line.. just a 68nf cap on pll bypass.
Thanks, i suppose ill give that a go then. I'm still using a 47nf cap as i cannot find a 68 in my shop. ill see if i can salvage one or start off at a 100nf like the coolrunner revb's use.

I am getting no where with this so far thought, been on for 4 hours today and has not booted xell. just flashing green debug led ever 5 seconds.

Does any onek now if we can use the cpu_rst alt point on xenons?