RGH zephyr board wont glitch

[shawndezy115]

djcenox - if u have a RROD you have a hardware issue recheck your wires.
reflash you original nand, then REMAKE YOU ECC FILE THEN FLASH IT.

---------- Post added at 17:56 ---------- Previous post was at 17:55 ----------

galgamo - your xbox green light will only flash if you donot have a drive in.

 

[djcenox]

Removed VCC from CR and reflashed back original nand. Worked! It started normally. But then after a shutdown now it won't wake up, WTF? I didn't do nothing just shut down, but before disassembly again i decided to check if it has 13604 before making new ECC and noway to get it on. Any tips?

 

[shawndezy115]

try flashing ur nand again with ur original. besides that i would make sure nothing was loose

 

[djcenox]

how can it be if i got it on. And well if VCC is connected and the power brick too, the red light of CR turns on. So i guess power is working. You suggest to flash again even if prevously worked?

 

[shawndezy115]

ur nand can corrupt.
u should not have ur CR on if u have stock image.
its woth a shot.

 

[djcenox]

Ok going to reflash again so i have to remove CR even if isn't connected.

 

[shawndezy115]

will the power. i normaly remove power to the board to test with stock image.

 

[djcenox]

Yes 3.3v was disconnected when i turned on.

 

[shawndezy115]

still nothing on my mother board. i cant figure it out.
HELP

 

[shawndezy115]

so after 8 hours i have made progress. i think. now my mother board wont turn on.
thats progress right. i removed the CR
Re installed for the 16 time today.
lifter the PLL bypass and then fixed that.
now i have no power except to the CR board.

idk. im ready to shoot my self

UPDATE: i removed PLL Bypas from mother board and it started powering on again.
but now i have either burned out my Green LED or for some odd reason my board isnt even attempting to glitch.
i hate this mother board

 

[galgamo]

galgamo - your xbox green light will only flash if you donot have a drive in.

Hi!! Yes, that's the problem. I have not connected the drive and the xbox green led is not blinking. That's why i know there is something wrong.

I'm making new tries. I have removed everything, brought the xbox back to normal operation (in which i succeeded) and started again.

I'll tell you if i manage to make it works.

Thanks!!