Zephyr CB 4580 E79 RROD & No Power

[xboxmoddz]

I have an elite zephyr console with a 6xxx dash version. I used the boxxdr method which i have used several times before i would get 0022 upon flashing xell.

I flashed the falcon xell and got e79, put orig nand back on and it boots fine. Put the falcon xell back on and e79, redid the wiring and same thing.

Flashed a xenon xell to it and now it wont even turn on. The nand x is not recognizing it. Tried another brick and another ROL. Console will not turn on.

Using jtag tool selecting aud clamp points. Totally stuck.

 

[PureVVater]

I have an elite zephyr console with a 6xxx dash version. I used the boxxdr method which i have used several times before i would get 0022 upon flashing xell.

I flashed the falcon xell and got e79, put orig nand back on and it boots fine. Put the falcon xell back on and e79, redid the wiring and same thing.

Flashed a xenon xell to it and now it wont even turn on. The nand x is not recognizing it. Tried another brick and another ROL. Console will not turn on.

Using jtag tool selecting aud clamp points. Totally stuck.

Why did you flash a xenon file to zephyr ?

 

[xboxmoddz]

clicked the wrong button

 

[steven007]

i had a similar problem with my Zephyr m8 not powering up after i flashed it but when i redone it with XBR i got power back, turned out bad blocks was the issue

http://team-xecuter.com/forums/showthread.php?t=55560

hope you get it sorted

 

[xboxmoddz]

thanks but i cannot even flash a new nand to the console. it is totally dead. after flashing the xenon nand it wont power on. nand x doesnt recognize it.

wiring is fine i dont know why flashing a xenon xell would kill the console