RGH Zephyr issue

[axelll]

I just got a Zephyr to recover the DVD key. Managed to boot to xell, got the keys and fuses. Added a Hitachi 79 with the correct DVD key. Gave the console to the customer, he returned a little after, the console was booting into an error, he told me he tried to make the latest update from the internet and was stuck to that error(3151 - 396b - 1380 - 2203 - c000 - 0001), no dash, no nothing.

Tried to flash back the original NAND extracted earlier but the console won't boot anymore, RROD 0022 after 5 trying to boot cycles(around 30 secs or so)

Any ideas what might the problem be? That update he tried to do, could have changed the LDV's? I wasn't inspired to dump a NAND right after he came to me...stupid

---------- Post added at 20:37 ---------- Previous post was at 20:35 ----------

It would be so easy to RGH the console but the customer doesn't want to, he needs LIVE...

Attached, a screenshot of the original NAND.

 

[jsinger47]

its an LDV AND a CB issue

1. first of all, it wasn't very smart to flash an old nand to a console that was in the middle of an update. why not just finish the update via USB?
2. when the console was partially updated, the LDV of the console changed, which is why your old stock NAND won't work
3. RGH won't work anymore because it looks like the console was starting to take 14717or 14719 update. You can tell this is the case because you get can't boot RGH

you will need to find a donor zephyr nand with the correct cb for you

then you will need to RGH2 it

from there you can obtain your LDV and you will be able to create a new stock NAND to use in the console without the coolrunner

LESSON FOR EVERYONE TO TAKE HOME FROM THIS: NEVER and i say again NEVER! flash an old nand to a console that has been updated! (even partially updated)

 

[un_xe]

You don´t have dumped the nand before you flashed back the original?

 

[jsinger47]

also, why would you put a hitachi 79 inside an xbox that is supposed to have a benq?

 

[axelll]

its an LDV AND a CB issue

1. first of all, it wasn't very smart to flash an old nand to a console that was in the middle of an update. why not just finish the update via USB?

I tried to finish the update through USB but it kept stopping with the error

2. when the console was partially updated, the LDV of the console changed, which is why your old stock NAND won't work

3. RGH won't work anymore because it looks like the console was starting to take 14717or 14719 update. You can tell this is the case because you get can't boot RGH

you will need to find a donor zephyr nand with the correct cb for you

then you will need to RGH2 it

from there you can obtain your LDV and you will be able to create a new stock NAND to use in the console without the coolrunner

LESSON FOR EVERYONE TO TAKE HOME FROM THIS: NEVER and i say again NEVER! flash an old nand to a console that has been updated! (even partially updated)

OK, thanx !

---------- Post added at 21:23 ---------- Previous post was at 21:22 ----------