RGH Zephyr not glitching

K

krier023

VIP Member
May 30, 2010
249
0
So I have this zephyr. I was originally going to just get the dvd key and sell it, so I dumped the nand(it was an 8 or 9xxx series dash). I glitched it, and got the keys and everything, flashed the original back, and updated.

Problem is, then I wanted to glitch it permenantly. I forgot to dump the nand again on the updated dash, so I built the image from the old dash.

When I write the freeboot image to the console, the console doesn't glitch(green light on the coolrunner doesnt blink either)

But when I write the XeLL ecc the coolrunner green light blinks, and it glitches like its suppose to.

Do you think the glitching problem is a problem from building the image without an updated stock nand, or maybe a problem with the freeboot builder itself. I am using Jtag tool, but tonight I will try to create an image with another program.

Any help would be appreciated, thanks guys.
 
K

krier023

VIP Member
May 30, 2010
249
0
Is there any way to make a 13604 stock image from the nand I have and a donor nand? Then create the freeboot image from that donor nand?

Also from trial and error, I created an image with multibuilder, and now if I boot xell from the eject button, it will boot and the coolrunner will blink, but If I try to boot normally, the coolrunner just blinks, and the console doesnt boot.
 
manwithoutname

manwithoutname

1
Jun 4, 2010
3,080
0
Never tried it but in principal you should be able to specially if you're able to run xell and get your CPU key. You should be able to build a good 13604 stock image and then use that to create freeboot.

When you created the image, flash it to your console 1st to see if it boots to stock 13604 before moving on to create freeboot.
 
K

krier023

VIP Member
May 30, 2010
249
0
manwithoutname said:
Never tried it but in principal you should be able to specially if you're able to run xell and get your CPU key. You should be able to build a good 13604 stock image and then use that to create freeboot.

When you created the image, flash it to your console 1st to see if it boots to stock 13604 before moving on to create freeboot.
Click to expand...
I am sorry for my ignorance, but can anyone send me to a good tutorial, or explain to me how to change my LDV and create a 13604 stock nand image?

Attached is my flash360 window.
Thanks for the help guys.
 
K

krier023

VIP Member
May 30, 2010
249
0
Would have never even thought 360flashtool would say the wrong ldv value. Thanks, got it all working.
 
K

krier023

VIP Member
May 30, 2010
249
0
smalltylynch said:
why can't you just write back to stock update dump it again and build ggbuild
Click to expand...
When you update, the ldv value changes, so my ldv value for my original 9199 nand is different than my 13604 nand. If I were to write my 9199 nand back, it would most likely boot to some sort of rrrod.
 
M

Mickey3177

VIP Member
Feb 2, 2011
301
0
Las Vegas USA
krier023 said:
When you update, the ldv value changes, so my ldv value for my original 9199 nand is different than my 13604 nand. If I were to write my 9199 nand back, it would most likely boot to some sort of rrrod.
Click to expand...
I had 9199 on a Zephyr that "Christmas Light" which is Manufacture Mode, there was no way to update it, it doesn't even come on. So I use my original nand and edited the Manufacture Mode to off and use that nand to create the image to 13604, my LDV matched my fuse set and I flashed it and worked perfect. If it didn't match it would not boot.
 
Last edited:
You must log in or register to reply here.