pages bg right


Liteon DG-16D5S LTU2 & Hitachi DL10N LTU2 PCB Install Pics

Posted by Scene News on Aug 2, 2013 in Featured Articles | Comments Off on Liteon DG-16D5S LTU2 & Hitachi DL10N LTU2 PCB Install Pics

Lot's of requests to show pics of the new Liteon DG-16D5S LTU2 & Hitachi DL10N LTU2 installed to drives. Here you go….

LTU2 Firmware & PCB Launches August 5th !

Posted by Scene News on Jul 31, 2013 in Featured Articles | Comments Off on LTU2 Firmware & PCB Launches August 5th !

After a long, hard development we are happy to finally announce that the new LTU2 PCB is shipping to all major retailers on August 5th. Due to the custom nature of the board we have been able to manufacture at a greatly reduced cost compared to the LTU v1 PCB (which is no longer available to purchase). You can now buy an LTU2 for only $49.95 !

There are two versions of PCB: Liteon DG-16D5S & Hitachi DL10N

You can also expect a new Jungle Flasher and a new LTU2 fw from C4E.

Official Product Description for retailers:

Do you have a faulty Liteon DG-16D5S or Hitachi DLN10N DVD in your Xbox 360? Are you swapping your drive to another console and are unable to program your firmware due to write protection being enabled?Team Xecuter have designed new versions of LTU2 PCB for both Liteon DG-16D5S & Hitachi DLN10N.

As with the DG-16D4S, the SPI is also locked on these drives (in addition to the firmware being encrypted), so this replacement PCB allows for the user to unlock and re-lock the SPI at will, and offers full ability to write your own firmware to the drive including your own drive key so you are able to replace your DVD drive if it becomes faulty without having to send it away for expensive repairs.

The Liteon DG-16D5S LTU2 & Hitachi DL10N Unlocked Replacement PCB has been manufactured so it is much cheaper than the original LTU PCB – get them while they are available they will be hot sellers !

  • Fits all versions of Liteon DG-16D5S (Red Liteon Version)
  • Fits all versions of Hitachi DL10N (Blue Hitachi Version)
  • Supports the latest LTU2 fw
  • Easily programmable using the X360USB PRO V1 or V2 (Update to the latest firmware v20.1)
  • Compatible with professional power adapters such as the X360USB PRO V2, CK3 Pro & CK3 Mini
  • Requires the latest Jungle Flasher & J-Runner
  • C4E's new LTU2 (LT Ultimate v2) firmware now allows booting of any Liteon or Hitachi based system without any previous firmware dump (inc the DG-16D5s 1175/1532 and Hitachi 0500/0502 firmwares) – all you need is the DVD Key and FCRT.bin which can be extracted using RGH or DGX methods.
  • Includes solderless quick install adapter
  • Includes external SPI unlock/lock switch
  • Includes external vendor switch
  • Includes heatsink for drive controller IC
  • Every board has a unique serial number which can be checked at serial.xecuter.com
  • Note: Due to how the custom chipset has had to be designed there is no CD-R support.

This device is designed with the primary purpose to aid and/or assist in the repair or replacement of defective hardware. It does not contain any code or any kind of microchip that infringes any intellectual property.

 

Fakes & Clones Notice

As always, there are those who try to rip people off by making junk quality versions of Xecuter products and trying to pass them off as their own. They even use the same serial number sticker hundreds and hundreds of times over. Either they are dumb or they think their customers are stupid.

Anyway just to show you how there are so many scams out there, there have been sites already taking peoples money for LTU2 orders – even when they are told time and time again not to.

Here is an example on the awful Alibaba website (CLICK HERE) in China – as you can see there are lots of LTU2 adverts – it's all knock off packaging and every board is actually a DG-16D4S PCB and thats just from the pictures – they probably don't even have those boards in stock and certainly not any LTU2. These will never work on a D5S drive and they will certainly never work with LTU2. Beware folks – always buy from official sources !

Liteon DG-16D5S LTU PCB – LAST FEW AVAILABLE – $20 OFF COUPON !

Posted by Scene News on Jul 4, 2013 in Featured Articles | Comments Off on Liteon DG-16D5S LTU PCB – LAST FEW AVAILABLE – $20 OFF COUPON !

We get asked a LOT for the LTU boards – luckily CK3.co.uk have found a box of 69 of them while they were clearing out one of their stock rooms (they have merged with Modtraders.co.uk so a huge clear out is in progress!)

These are the last of them so grab as many as you can – once these are gone – that's it (simply cannot get the parts any more)

We have negotiated a special coupon for you all that will give you $20 off (so $49.95 instead of $69.95 !)

http://www.ck3.co.uk/tx-liteon-dg-16…-pcb-1175.html

COUPON: TX20OFFLTU

WHILE STOCKS LAST !

XBOX 360E Working with CR3 Pro v3/v4, Corona QSB v3 & POSTFIX ADAPTER v2 :)

Posted by Scene News on Jun 26, 2013 in Featured Articles | Comments Off on XBOX 360E Working with CR3 Pro v3/v4, Corona QSB v3 & POSTFIX ADAPTER v2 :)

As the title says the new XBOX 360E has been tested working with CR3 Pro v3/v4 Edition, Corona QSB v3 & POSTFIX ADAPTER v2

First RATER score out of the box (without any tuning) was a whopping 8.30 !

All this is out of the box hardware – no fixes or changes required (R2C4, R2C6, R2C7 & R2C10 still need bridging if there is no resistor there)

For future reference we will call these two new XBOX 360E Motherboards Corona v5 & Corona v6

Corona v5 = XBOX 360E 250GB
Corona v6 = XBOX 360E 4GB (XECUTER 4GB R/W ADAPTER REQUIRED)

Video Thanks to XDK – Notice he has a SONUS 360 Installed (R2D2 startup sounds) 🙂

We have also updated the Corona identification guide – all images & guides can be found here

New Resellers Added

Posted by Scene News on Jun 20, 2013 in Featured Articles | Comments Off on New Resellers Added

We are happy to add new resellers from Italy, Argentina & Turkey.

Check out our resellers page for  recommended and respected retailers.

We have also removed a couple of sellers after finding they sold the fake/clone CoolRunner Rev D – this is not an Xecuter product and we do not support it or provide any warranty whatsoever for it.

Liteon DG-16D5S & Hitachi DL10N LTU2 – New Hardware Coming !

Posted by Scene News on Jun 3, 2013 in Featured Articles | Comments Off on Liteon DG-16D5S & Hitachi DL10N LTU2 – New Hardware Coming !

After many weeks of design and testing we have finally finished the design for the very secret LTU2 hardware

You may have noticed that the 1175 PCB were very rare and very expensive if you managed to get one due to the chipset being super rare and of course super expensive (we still say if you find anywhere that has stock of the LTU PCB's, grab them as they are now rare and not possible to make any more)

Others tried to find solutions which turned out to be shockingly bad design and just as expensive if not more so.

Can you say brand new chipset, tons and tons of available stock, MUCH cheaper cost, new firmware…..?

We've also made designs for both the Liteon DG-16D5S & Hitachi DL10N chassis 

As usual this is a teaser – more news coming soon 

R-JTAG RELEASED FOR PHATS (INC GUIDES) – CR3 PRO (CORONA V3/V4) FAKE POST RELEASED (INC GUIDES)

Posted by Scene News on May 20, 2013 in Featured Articles | Comments Off on R-JTAG RELEASED FOR PHATS (INC GUIDES) – CR3 PRO (CORONA V3/V4) FAKE POST RELEASED (INC GUIDES)

You have been waiting a long time for these to be released. Finally, the worlds fastest homebrew booting devices for both Phat and now ALL version Slims are available.

R-JTAG FOR PHAT ZEPHYR/OPUS/FALCON/JASPER – INSTALL GUIDES & INSTRUCTIONS: CLICK HERE

CR3 PRO FOR SLIM TRINITY/CORONA V1 –  INSTALL GUIDES & INSTRUCTIONS: CLICK HERE

CR3 PRO FOR SLIM CORONA V3 / CORONA V4 –  INSTALL GUIDES & INSTRUCTIONS: CLICK HERE

QSB V3 EXT Adapter For Nand-X / JR Programmer

Posted by Scene News on May 11, 2013 in Featured Articles | Comments Off on QSB V3 EXT Adapter For Nand-X / JR Programmer

After popular demand I have designed an effective little adapter module that hooked up to the QSB V3 for both Phats and Slims and is connected to the outside of the case for easy NAND Read / Write, POST Monitoring etc etc

Ask your local stockist to place an order for the first batch – we expect to be shipping next week MSRP only $12.95 (Does not include the QSB V3 Boards)

R-JTAG Is Coming…..(New Exploit For Phats)

Posted by Scene News on Apr 30, 2013 in Featured Articles | Comments Off on R-JTAG Is Coming…..(New Exploit For Phats)

After several months of development we can now tell you that our new exploit for phat consoles is about to be launched.

QUICK FAQ:

– R-JTAG comes in two flavors – a starter kit and an ultimate kit with all the bells and whistles
– The first release will support Zephyr, Opus, Falcon, Jasper
– There will be a Xenon only version
– Boot speeds are similar to JTAG and RGH1 (from instaboot to 10 seconds)
– Full POST Monitoring with RATER and JRP v2
– Dual Nand works fantastic with the DemoN – especially for Stock / Hacked Nand setups
– No more need for RGH1/RGH2
– Works on the very latest dash/kernel versions
– Solid, reliable booting

Some comments posted by testers on the forums……..

– There are a extremely large portion of instant boots! considering RGH1 and RGH2 were beyond useless on this console – Its fu##in awesome! 

– My Jasper has never taken more than 15 seconds to boot. I've been using it for months now with an older, unrefined version of the hack. So yeah, its pretty good.

– With RJTAG Falcons are now more reliable than Jaspers…..again. We're back to RGH1-type days.

– My Split CB Falcon would never boot with RGH2 – it now boots between 7 and 15 seconds every time 

– Jasper 512 .. wouldn't boot at all with RGH2 – now check out my these Rater timings with RJTAG – WoW

Join #R-JTAG on EFNET and stay tuned…….

Team Xecuter Presents: DemoN NandSwitcher 1.0 (Codename !DSWITCH)

Posted by Scene News on Apr 18, 2013 in Featured Articles | Comments Off on Team Xecuter Presents: DemoN NandSwitcher 1.0 (Codename !DSWITCH)

Team Xecuter Presents: DemoN NandSwitcher 1.0 (Codename !DSWITCH)

Users who have a demon can now toggle their nands without getting up. This solution works after the console has glitched and the bootanimation has played.

For this reason this solution is more pleasant to use on a console that glitches super fast, for example the CR3 Pro (Slim) or our brand new hack for phats – R-JTAG (more on that later….)

Technical Details:

  • XEX file is launched.
  • UART command is issued to inform DemoN of the nand switching intentions.
  • Console is issued a clean shutdown command.
  • DemoN uses X8 to detect console is off.
  • DemoN toggles nand, clears smc and boots console.
  • Once the user is done playing on the console and shuts it down DemoN takes over again.
  • DemoN again uses X8 to detect console is off.
  • DemoN toggles nand, clears smc and leaves console off.

DemoN Requirements:

  • For proper operation, X8 needs to be soldered to 3V3 non-standby.
  • Kiosk pin (x7) needs to be soldered to the kiosk pin on the console.
  • DemoN needs to be updated to the latest firmware v1.04

How to Use:

  1. Install Demon as normal with the additional requirements of X8 being installed.
  2. Transfer the XEX to the console.
  3. Setup the xex file as a quick launch entry in launch.ini. Example: BUT_X = hdd:\Apps\NandSwitcher.xex
  4. Boot console and hold the quick launch button you used.

Thanks to TB, BioHazard, cOz, NatelX and the rest of the DemoN dev team.

DemoN really is a fantastic device. If anyone is serious about having a high end nand switching system that includes a stack of low level development commands and features with continued support, at just $49.95 the DemoN is the only choice on the market.

Download: Xbins

« Previous Entries Next Entries »